You are here
AmberCut™ WS-236T
Biodegradable Wire Slice Vehicle
AmberCut™ WS-236T is a ready-to-use, synthetic, wire slice vehicle specifically formulated for the free abrasive cutting of sapphire or other crystalline materials. It provides excellent cut rates and imparts outstanding surface finishes with reduced warp and TTV. AmberCut WS-236T offers superior abrasive suspension at loading rates up to 60%. Slurries blended with this vehicle have low dynamic viscosities and smooth flow properties. Additionally, AmberCut WS-236T slurries exhibit extended use life allowing the slicing of multiple ingots while maintaining performance properties. This unique formula is biodegradable, water rinsable and will not leave films or residues.
Features/Benefits
- Provides excellent cut rates and outstanding surface finishes
- Superior abrasive suspension
- Reduced warp and TTV
- Low dynamic viscosity for smooth slurry flow
- Biodegradable and poses no environmental or health risks
- Minimal contamination of parts
- Water rinsability facilitates cleaning
- Provides maximum slurry efficacy
Specifications
| Appearance | Clear, light yellow liquid |
| Specific gravity, 20°C | 1.12 |
| LBS/gallon | 9.35 |
| Conductivity | <10 μS |
| pH (5% solution) | 8.5 |
| Viscosity (Brookfield @ 28°C) | 70 cps |
| Flash point | >300°F (TCC) non-combustible |
| Water solubility | Soluble in all proportions |
Additional Information
AmberCut™ WS-236T is ready to use and does not require dilution. It is capable of achieving loading rates of up to 0.7:1, abrasive to AmberCut WS-236T. Typical abrasives, up to 30 microns in size, include silicon carbide, diamond, boron carbide, aluminum oxide, etc. For diamond, typical loading ranges from 13 - 20% (w/w).
- 55 gallon drums
- 5 gallon pails
- bulk tote containers
